(1) White Ceramic 7 Pin Tube Socket.
Manufacturer unknown.
Please note: Because this is a vintage NOS socket, the soldering terminal lugs are tarnished and blackened from age and storage (see third photo) with a couple of small spots of surface rust. They will most likely need cleaning or burnishing before soldering - a brass wire or steel wire brush tends to do a good job at this. The white ceramic has some areas of dark spotting from production.
Measurements:
The top edge diameter (the hole required for chassis installation) is 1 1/4" (31.75 mm).
The bottom edge diameter is 1 5/16" (33.33 mm).
~ Please view all 4 photos ~
